Note AcademyNote Academy

Chemistry · May / June 2023 · Paper 31 · Question 4

YCH11

As printed in the paper

The question as text

4 This question is about calcium and calcium hydroxide, Ca(OH)2 . A student reacted calcium with water to determine a value for the molar volume of hydrogen at room temperature and pressure. Procedure Step 1 200 cm3 of distilled water (an excess) was transferred to a conical flask. Step 2 A small piece of calcium metal was placed in a pre‑weighed weighing boat. The boat was then reweighed. Step 3 The calcium was dropped into the conical flask and a bung connected to a gas syringe was inserted. Step 4 The volume of hydrogen collected was recorded. gas syringe conical flask calcium and water Results Mass of weighing boat / g 1.657 Mass of weighing boat and calcium / g 1.783 Volume of hydrogen collected / cm3 72.0 The equation for the reaction in the conical flask is shown. Ca + 2H2O → Ca(OH)2 + H2

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 4(a)(i)[2]

    following points:

    bubbles / effervescence (1)

    Allow the gas syringe filled up/(barrel) moved

    Ignore gas/ hydrogen given off

    goes cloudy / white precipitate / white solid (1)

    Ignore goes milky

    Ignores forms a colourless solution

    calcium/solid disappears (1)

    Allow calcium/solid dissolves

    Ignore Ca floats

    Mention of any coloured product (max 1)

    Confusion with sodium e.g. whizzing round (max 1)

    Example of calculation

  • 4(a)(ii)[4]

    calculation of mass of Ca

    1.783 g – 1.657 g = 0.126 (g)

    calculation of moles of Ca

    0.126/40.1 = 0.0031421 / 3.1421 × 10–3 (mol)

    72.0/0.0031421 = 22914 / 2.2914 × 104 (cm3)

    calculation of volume of one mole of hydrogen gas

    Or

    0.072/0.0031421 = 22.914 / (dm3)

    correct units and answer to 2 or 3 SF

    23 / 22.9 dm3 (mol–1) / 23 000 / 22 900 cm3 (mol–1)

    Allow TE throughout

    Correct answer with or without working scores (4)

    Example of calculation

  • 4(b)(i)[1]

    percentage error

    100 × (23.9 – 21.8) ÷ 23.9 = 8.7866 (%)

    Ignore SF except 1SF

    Ignore +/

    Do not award 9%, 8.7% or 8.78%

    Correct answer with no working scores (1)

    An answer that makes reference to the following points:

  • 4(b)(ii)[2]

    some (hydrogen) gas escapes before the bung is

    Allow there was a delay (after dropping in the Ca )

    before the bung could be placed on the conical

    attached

    OR

    flask/connecting the apparatus

    reaction starts before the bung is placed in the

    Ignore hydrogen dissolves in water

    conical flask

    Ignore just the gas escaped/ bung didn’t fit properly

    some of the calcium had already formed calcium

    Allow the Ca/it was not pure

    oxide

    Allow the Ca/it did not fully react

    Allow the Ca/it did not fully dissolve

    Ignore just the reaction was incomplete

    Ignore any measurement errors eg some Ca left in

    the weighing boat

    Ignore nonstandard conditions etc

    Do not award the water was limiting

    An answer that makes reference to the following points:

  • 4(c)(i)[2]

    (from) yellow

    Ignore shades of colours eg pale

    (to) orange

    Colours reversed scores (1)

  • 4(c)(ii)[2]

    Titration

    1

    2

    3

    4

    Final burette reading / cm3 26.85

    31.25

    34.55

    27.15

    Final burette reading / cm3 0.00

    5.00

    8.00

    1.00

    Titre / cm3

    26.85

    26.25

    26.55

    26.15

    Concordant results (Π)

    Π

    Π

    all 6 correct

    26.25 + 26.15

    calculation of mean titre

    2

    = 26.20 (cm3)

    Allow 26.2

    Allow TE for the mean titre on

    ticked boxes

    Example of calculation

  • 4(c)(iii)[4]

    26.2 × 0.0400 / 1000 = 0.001048 (mol)/ 1.048 × 10 3 (mol)

    calculation of moles of hydrochloric acid

    TE on (c)(ii)

    1.048 × 10−3 ÷ 2 = 0.000524 / 5.24 × 10−4 (mol)

    calculation of moles of calcium hydroxide in 25 cm3

    5.24 × 10−4 × 1000 ÷25 = 0.02096 (mol)

    calculation of moles of calcium hydroxide in 1 dm3

    = 0.02096 × 74.1 = 1.5531 (g dm−3 )

    calculation of concentration in g dm−3

    Allow = 0.02096 × 74 = 1.5510 (g dm−3)

    Ignore SF except 1SF

    Ignore units

    TE throughout

    Correct answer with no working score (4)

    An explanation that makes reference to the following

  • 4(d)[2]

    points:

    goes cloudy / white precipitate / white solid (of

    Do not award any other white ppt eg CaO, CaCl2

    calcium hydroxide)

    Do not award white anhydrous calcium hydroxide

    Do not award any other colour or extra observations e.g.

    effervesces

    Do not award any reference to water evaporating/

    crystallisation

    (increasing temp) moves the equilibrium in the

    Allow (increasing temp) means:

    calcium hydroxide solubility decreases /

    endothermic direction so:

    calcium hydroxide solubility decreases/

    less calcium hydroxide dissolves/calcium hydroxide

    forms

    less calcium hydroxide dissolves/

    more (solid) calcium hydroxide forms

    Or

    (increasing temp) favours the reverse direction so:

    Ignore any reference rates of dissolving

    calcium hydroxide solubility decreases /

    less calcium hydroxide dissolves/

    more (solid) calcium hydroxide forms

    (Total for Question 4 = 19 marks)

    (Total for Paper = 50 marks)

    Pearson Education Limited. Registered company number 872828

    with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.