Note AcademyNote Academy

Chemistry · Oct / Nov 2022 · Paper 61 · Question 2

YCH11

As printed in the paper

The question as text

2 A plant fertiliser contains a mixture of sand and ammonium sulfate, (NH4)2SO4. The percentage by mass of ammonium sulfate in the fertiliser is determined by the procedure shown. Procedure Step 1 5.75 g of the plant fertiliser is added to a conical flask containing 20.0 cm3 of sodium hydroxide solution with a concentration of 1.00 mol dm–3. Ammonia is formed in the reaction. (NH4)2SO4(aq) + 2NaOH(aq) → 2NH3(g) + Na2SO4(aq) + 2H2O(l) Step 2 The flask is heated for several minutes, to ensure that all the ammonia formed is boiled off. Step 3 The solution containing excess sodium hydroxide is separated from the sand. Step 4 The aqueous solution containing the excess sodium hydroxide is then made up to 250.0 cm3 using deionised water. Step 5 25.0 cm3 samples of solution containing sodium hydroxide from Step 4 are titrated with hydrochloric acid of concentration = 0.0500 mol dm–3.

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 2(a)[2]

    An answer that makes reference to the following points:

    M1 can be shown with a suitable

    filter to remove sand / to separate the sodium hydroxide

    labelled diagram

    Accept decant or description of

    Allow solid for sand

    Allow use of Buchner funnel

    Allow use of sieve

    Ignore hot/cold references to filtration

    rinse (sand) with deionised / distilled water

    Allow rinse with solvent

    (to ensure all the sodium hydroxide solution is separated)

  • 2(b)[2]

    An answer that makes reference to the following points:

    use of (250 cm3) volumetric flask

    Allow graduated / standard flask

    Do not allow beaker/conical

    flask/measuring cylinder

    M2 independent of M1 but reference

    add deionised / distilled water

    and

    to ‘mark’ or volume line or 250 cm3

    required

    up to the mark

    and

    mix

    Allow any indication of mixing e.g.

    shake, invert, swirl

    Allow ‘pure water’

    Just ‘water’ is insufficient unless

    qualified at some point

  • 2(c)[5]

    Example of calculation

    (M1) calculation of initial moles of NaOH

    (20 ÷ 1000) × 1 = 0.02 (mol)

    AND

    (12.75 ÷ 1000) × 0.0500 = 6.375 × 10–4 (mol)

    calculation of moles of HCl

    (M2) calculation of moles of NaOH in 250 cm3

    6.375 × 10–4 × (250 ÷ 25) = 6.375 × 10–3 (mol)

    (M3) calculation of moles of NaOH that reacted

    0.02 − 6.375 × 10–3 = 0.013625 (mol)

    with (NH4)2SO4

    (M4) calculation of mass of (NH4)2SO4

    0.013625 ÷ 2 × 132.1 = 0.89993 (g)

    Allow TE from M1 to M4

    (M5) calculation of percentage by mass of

    (0.89993 ÷ 5.75) × 100 = 15.651 % = 15.7 %

    (NH4)2SO4 in fertiliser

    Allow TE from M4 to M5 if answer is < 100 %

    Ignore SF

    Note penalise rounding errors once only in M1M5

    Final answer without working scores (5)

    22.2 % scores (4) omission of x10 in step 2

    31.3 % scores (4) omission of ÷ 2 in step 4

    44.5% scores (3) omission of x10 and ÷ 2

    62.6% scores (4) multiplied by 2 instead of ÷ 2

    Allow use of 132 for step 4

  • 2(d)(i)[3]

    An explanation that makes reference to the following points:

    Allow reference to neutralisation

    NH3 (remaining) will react with the HCl / acid

    (in the titration)

    M2 dependent on some attempt at M1 such as

    so titre would be greater

    ammonia remaining

    Allow less (NH4)2SO4 (in the fertiliser)

    so (it would appear that there is a) lower percentage of

    (NH4)2SO4 (in the fertiliser)

    M3 can be awarded provided there is reference

    to greater titre

    Allow (1) as a TE if titre is stated to be smaller

    which means the percentage will be higher

  • 2(d)(ii)[1]

    An answer that makes reference to the following point:

    Do not award dip the litmus into the solution

    place (damp) red litmus (paper into vapour)

    and

    which should remain red (if all NH3 removed)

    Allow (litmus) goes blue if any NH3 remains

    Ignore reference to pungent smell

    Allow place (damp) universal indicator (paper)

    into vapour

    and

    which should remain yellow (if all NH3

    removed) /

    goes blue or purple if any NH3 remains

    Allow place stopper of conc. HCl bottle near

    mouth of reaction vessel/ use HCl(g)

    and

    which will not form white smoke if NH3 all

    removed

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.