Chemistry · Oct / Nov 2021 · Paper 41 · Question 20
YCH11
As printed in the paper
The question as text
20 Sodium hydrogensulfate is a widely used acid, with applications that include removing limescale and as a food additive. Sodium hydrogensulfate is a weak acid − . because of the presence of the hydrogensulfate ion, HSO4
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
20(a)(i)[1]
Examples of equations:
correct equation
HSO4− ⇌ H+ + SO42−
Or
HSO4− + H2O ⇌ H3O+ + SO42−
Allow
HSO4− + H2O ⇌ H+ + SO42−
Or
HSO4− ⇌ H3O+ + SO42−
Accept → for ⇌
Ignore state symbols even if incorrect.
20(a)(ii)[5]
Example of calculation:
ሾୌశሿሾୗరమషሿ
ሾୌశሿమ
expression for Ka (1)
Ka =
or Ka=
ሾୌୗరషሿ
ሾୌୗరషሿ
M1 is scored if implied in the calculation but if given must
be correct
Comment: Do not penalise SO4− for SO42−
calculation of Ka from pKa and [H+] from pH (1)
Ka = 10−1.92 (= 0.012023) and [H+] = 10−1.13 (= 0.074131)
.ସଵଷଵమ
rearrangement of expression for Ka and substitution of values and
[HSO4−] =
.ଵଶଶଷ= 0.45709 (mol dm−3)*
calculation of [NaHSO4] in mol dm−3(1)
calculation of Mr(NaHSO4) (1)
Mr(NaHSO4) = 120.1
Allow 120
calculation of [NaHSO4] in g dm−3 (1)
[NaHSO4] = 120.1 x 0.45709
= 54.896(g dm−3)* (54.851 if 120 used)
* These are obtained using unrounded intermediate values
If Mr(HSO4−) = 97.1 is used 44.383 (g dm−3) scores M5
Accept
[HSO4−] − [H+] = 0.45709
[HSO4−] = 0.45709 + 0.074131
= 0.53122 (mol dm−3)
= 63.799 (g dm−3)
TE at each stage
Ignore SF except 1 SF
COMMENT
Correct answer with some working scores (5)
20(a)(iii)[2]
An answer that makes reference to the following:
Comment: Do not penalise SO4− for SO42−
Allow
hydrogensulfate (ion) dissociation / ionisation negligible (1)
[HSO4−]equilibrium = [HSO4−]initial
[NaHSO4]equilibrium = [NaHSO4]initial
Allow Slight / partial / incomplete / does not dissociate for
‘negligible’ (dissociation)
[H+] only due to (dissociation / ionisation of) HSO4− /
Allow
hydrogensulfate (ion) (1)
[H+] due to) dissociation / ionisation of water negligible
Or
dissociation / ionisation of water negligible
Or
[SO42−] = [H+]
Allow
[H3O+] for [H+] throughout
Penalise omission of [] in discussion once only
Penalise use of HA or ‘weak acid’ or A− once only
Ignore references to temperature
20(b)(i)[2]
An answer that makes reference to the following:
a buffer resists change in pH (1)
Accept
Maintains a fairly / nearly constant pH
Allow
withstands change in pH
Allow
large change or small change for change
Do not award maintains constant pH
Ignore references to the acidsalt ratio
Allow
on the addition of small amounts of acid and / or of alkali (1)
H+ for acid
base / OH− for alkali
20(b)(ii)[3]
Example of calculation:
ሾୌశሿሾୗరమషሿ
Ka =
ሾୌୗరమషሿ
ሾୌశሿ ୶ .ହ
Ka = 10−1.92 (=0.012023) =
substitution of values into Ka expression (1)
.ହ
୶ .ହ
.ହ (mol dm−3)
[H+] =
rearrangement of Ka expression (1)
calculation of pH to at least 1 dp (1)
pH = −log(1.5 x 0.012023) (= −log 0 .018034) = 1.744
Ignore SF except 1 SF
Correct answer with some working scores (3)
TE at each stage but M3 dependent on some use of Ka and
calculation of [H+] and value of pH < 7
Accept use of HendersonHasselbalch equation:
ሾୗరమషሿ
ሾୱୟ୪୲ሿ
ሾୌୗరషሿ or log
ሾୟୡ୧ୢሿ (1)
pH = pKa + log
.ହ
= 1.92 + log
.ହ (1)
= 1.7439 (1)
TE on arithmetical errors
If salt and acid reversed in HH equation max 1 (M3 only
for 2.0961)
No TE on any other error in HH equation (scores (0))
20(b)(iii)[4]
Example of calculation:
pH (0.00500 mol dm−3 HCl) = −log(0.00500) = 2.30
calculation of pH
and
change in pH for water (1)
Δ(pH) = 7− 2.30 = 4.70
Accept changes from 7 to 2.3
If no other mark is scored in (b)(iii) pH = 2.3 scores 1
calculation of new [HSO4−]
0.750 + 0.00500 = 0.755 (mol dm−3)
and
0.500 − 0.00500 = 0.495 (mol dm−3)
calculation of new [SO42−] (1)
୶ .ହହ
.ଵଶଶଷ ୶ .ହହ
calculation of [H+] (1)
[H+] =
=
.ସଽହ
.ସଽହ
= 0.018338 (mol dm−3)
TE only on arithmetical errors and if at least one change
in concentration calculated
pH = −log(0.018338) = 1.737
calculation of pH and change in pH for buffer (1)
Δ(pH) = 1.744− 1.737 = 0.007
OR
Δ(pH) = 1.74− 1.737 = 0.003 if rounded value given in
(b)(ii)
Use of HH for M3 and M4
Accept changes from 1.744 / 1.74 to 1.737
.ସଽହ
Allow 1.74 to 1.74 (3 SF) / no change
pH = 1.92 + log
.ହହ (1)
TE on M4 for arithmetical errors on correct method
= 1.92 + (− 0.18334) = 1.7367 from 1.7439 (1)
Allow TE if there has been some attempt at calculating
a new [H+]. In both cases final pH must be lower than
the start pH of the buffer and Δ(pH) ≤ 0.2
Ignore SF
20(c)[3]
An explanation that makes reference to the following:
the colour of the methyl orange indicator will change from red to orange
Ignore just ‘red to yellow’
to yellow (1)
The volume of alkali added between the start of the indicator colour
Allow
There is only a gradual change in colour
change and the formation of the endpoint colour is large (compared
or
with the volume used if the indicator change colour in the vertical
the (indicator) colour changes slowly
section of the titration curve) (1)
or
there is no sharp change in colour
or
colour change will not occur on the addition of just a
few drops of alkali
Ignore just ‘colour change of methyl orange occurs
the endpoint (shown by the methyl orange) will occur (well) below the
at 3.24.4’
equivalence point (1)
(Total for Question 20 = 20 marks)
Total for Section C = 20 marks
Total for paper = 90 marks
Pearson Education Limited. Registered company number 872828
with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

