Chemistry (AS & A Level) · Oct / Nov 2025 · Paper 53 · Question 2
9701
As printed in the paper
The question as text
9701/53/O/N/25 © UCLES 2025 [Turn over 2 Effusion is the process in which a gas escapes through a small hole. A student investigates the relationship between rate of effusion and relative molar mass of a gas using the apparatus shown in Fig. 2.1. gas syringe side-arm tube plunger gas being tested three-way tap aluminium foil with small hole Fig. 2.1 The following method is used: step 1 Turn the tap and remove any gas from the syringe through the side-arm tube, by pushing in the plunger. step 2 Add 50 cm3 of the gas being tested to the syringe through the side-arm tube. step 3 Remove the gas from the syringe, through the side-arm tube, by pushing in the plunger. step 4 Add 70 cm3 of the gas being tested to the syringe through the side-arm tube. step 5 Turn the tap to connect the syringe to the tube with the aluminium foil and small hole. step 6 Allow the syringe plunger to fall and start a timer when the volume of gas in the syringe reaches 60 cm3. step 7 Stop the timer when the volume of gas in the syringe reaches 10 cm3. Record the time taken. step 8 Repeat steps 1 to 7 with different gases.
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
2(a)[1]
To ensure no air / other gas remains in the syringe 1
2(b)(i)[2]
1 Mr 0.707 0.500 0.222 0.158 0.109 Rate of effusion /cm3s-1 4.63 3.27 1.45 1.26 0.71
2(b)(ii)[1]
Time (taken). 1
2(b)(iii)[1]
size of hole 1
2(c)[2]
M1 all 5 points plotted correctly. M2 Straight line of best fit drawn
2(d)[1]
Point most anomalous to the plotted line of best fit circled. AND If point above LOBF (Measured rate of effusion is higher than the true rate predicted by LOBF.) for this point … measured / recorded (effusion) time < true / actual time OR If point below LOBF (Measured rate of effusion is lower than the true rate predicted by LOBF.) for this point … measured / recorded (effusion) time > true / actual time 1
2(e)[1]
Yes AND The graph / LOBF… is a straight-line AND it goes through the origin. 1
2(f)[1]
The results are not reliable as there is an anomalous result. 1
2(g)(i)[2]
M1 Effusion rate = 50/31.6 = (1.58) Correct value for 1 Mr read from x-axis 1 M2 Value correctly converted to M. 1
2(g)(ii)[1]
If calculated M > 16 (The average) M (of the other components) is greater than 16 / calculated value for g(i). 1
2(h)[1]
(Rate of effusion) increases AND (At higher temperature) gas particles move more quickly. 1
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

