Chemistry (AS & A Level) · Oct / Nov 2023 · Paper 52 · Question 1
9701
As printed in the paper
The question as text
Thermometric titrations can be used to determine the standard enthalpy change of neutralisation. The maximum temperature reached in a thermometric titration occurs at the point of neutralisation between an acid and an alkali. A diagram of the apparatus used is shown in Fig. 1.1. burette containing sodium hydroxide thermometer polystyrene cup 25.00 cm3 hydrochloric acid stirrer Fig. 1.1 A student uses the following method. Step 1 Transfer 25.00 cm3 of 1.00 mol dm–3 dilute hydrochloric acid, HCl (aq), to a polystyrene cup. Step 2 Place a thermometer with 0.2 °C divisions into the HCl (aq) in the polystyrene cup and leave it for 3 minutes. Record the temperature. Step 3 Add 5.00 cm3 aqueous sodium hydroxide, NaOH(aq), from a burette. Stir and record the temperature of the solution in the polystyrene cup. Step 4 Immediately add another 5.00 cm3 of NaOH(aq). Stir and record the temperature of the solution in the polystyrene cup. Step 5 Repeat Step 4 until there is no further increase in temperature. Once the temperature starts to decrease, repeat Step 4 three more times. The student obtains the results shown in Table 1.1. 3 Question 1 continues on the next page. 4 Table 1.1 volume of NaOH(aq) added / cm3 temperature / °C 0.00 18.8 5.00 21.3 10.00 23.8 15.00 26.4 20.00 27.4 25.00 26.2 30.00 25.1 35.00 24.0 40.00 23.2
Read automatically from the paper; the printed page above is exact.
Show the answer and mark scheme
1(a)(i)[2]
9 points plotted correctly Two straight lines of best fit which correctly intersect
1(a)(ii)[1]
Temperature change = intersection point temperature (read from graph) – 18.8
1(a)(iii)[1]
intersection point volume (read from graph)
1(a)(iv)[2]
n(HCl) = 1.00 × (25.00/1000) = 0.0250 [NaOH] = 0.0250 × (1000/1 (a) (iii))
1(a)(v)[1]
The indicator: changes colour rapidly / instantly OR detects end-point / neutralisation rapidly / instantly
1(b)[1]
(25 cm3) Volumetric pipette
1(c)[1]
((2 × 0.1)/2.5) × 100 = 8(.00) (%)
1(d)[2]
mcΔT = (25.00 + 22.10) × 4.18 x 6.0 = 1181.268 (J) = q/n(NaOH) (÷1000) = 1181.268 / (1.00 × 22.10/1000) ÷ 1000 = – 53.5 (kJ mol–1)
1(e)[1]
Heat loss (to the surroundings)
1(f)[2]
Ethanoic acid is a weak acid Energy is required for dissociation of ethanoic acid
Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.

