Note AcademyNote Academy

Chemistry (AS & A Level) · Oct / Nov 2021 · Paper 52 · Question 1

9701

As printed in the paper

The question as text

It is possible to measure the enthalpy change of combustion, ∆Hc, of ethanol, C2H5OH, using the following apparatus. metal can lid wick wooden blocks thermometer water tripod spirit burner containing ethanol A student carries out an experiment to determine the value for ∆Hc of ethanol using the following instructions: ● Weigh the spirit burner with ethanol and lid, record the starting mass to two decimal places. ● Measure 100.00 cm3 of water and place it into the metal can. ● Place a thermometer, with 0.1 °C graduations, into the water and stir it, wait for 2 minutes. ● Record the temperature of the water. ● Light the wick and allow the flame to heat the water. ● Continue to stir the water using the thermometer. ● After the temperature has risen by approximately 20 °C place the lid on the flame to extinguish it. ● Record the maximum temperature of the water. ● Weigh the spirit burner and record the final mass. The student obtained the following results. initial temperature of water / °C maximum temperature of water / °C change in temperature of water, ∆T / °C initial mass of spirit burner / g final mass of spirit burner / g mass of ethanol burned / g 18.1 38.2 153.29 152.76

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 1(a)[1]

    20.1 °C AND 0.53 g

  • 1(b)[1]

    0.53 / 46 = 0.0115 (mol)

  • 1(c)[2]

    M1 q = 100 × 4.18 × 20.1 = 8401.8 J M2 ΔHc = 8401.8 / 0.0115 × 1000 = –731 (kJ mol–1)

  • 1(d)[1]

    (2 × 0.05) / 20.1 × 100 = 0.498% Working must be shown

  • 1(e)[1]

    (accuracy would) increase and the percentage error (for temperature / calculated mass of ethanol) is reduced (accuracy would) decrease and More heat loss (due to high temperature rise)

  • 1(f)[2]

    M1 (ΔHc) would be less exothermic / less negative M2 moles (of ethanol) ‘combusted’ / ‘used’ (will appear to) increase (due to evaporation)

  • 1(g)(i)[2]

    M1 heat loss (to the surroundings) M2 incomplete combustion

  • 1(g)(ii)[1]

    bond enthalpies vary according to compound / molecule (the bond is situated in) OR average bond enthalpies assume ethanol / water / substances are gaseous

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.