Note AcademyNote Academy

Chemistry (AS & A Level) · May / June 2021 · Paper 51 · Question 2

9701

As printed in the paper

The question as text

A student is given 250.0 cm3 of solution containing a mixture of Fe2+ and Fe3+ ions. The student is asked to find the total mass of iron ions and the percentage by mass of Fe3+ in the solution by performing titrations with aqueous potassium manganate(VII), KMnO4. The student is told that the Fe3+(aq) ions can be reduced to Fe2+(aq) ions by reaction with zinc. The student is given the following instructions. ● Calculate the mass of KMnO4 needed to make 500.0 cm3 of 0.0200 mol dm–3 KMnO4(aq). ● Record the mass of an empty plastic weighing boat (a small container used to hold solid samples). ● Add the calculated mass of KMnO4 to the weighing boat. ● Transfer the KMnO4 from the weighing boat into a 100 cm3 beaker. ● Add 50 cm3 of distilled water to the beaker. ● Transfer the mixture from the beaker into a 500.0 cm3 volumetric flask. ● Make up to the graduation mark, dropwise, with distilled water. 3 3

Read automatically from the paper; the printed page above is exact.

Show the answer and mark scheme
  • 2(a)(i)[1]

    Mr KMnO4 = 158.0 500 × 0.02 / 1000 = 0.01 0.01 × 158.0 = 1.58 g

  • 2(a)(ii)[1]

    (2 × 0.005 / 1.58) × 100 = 0.63%

  • 2(a)(iii)[1]

    rinse the solid off the weighing boat into the beaker OR weighing the mass directly into the beaker OR (re)-weigh the weighing boat after transferring the KMnO4 into the beaker

  • 2(a)(iv)[2]

    Any two from:

    stir / agitate / mix (to ensure that the solid has dissolved) rinse the beaker and transfer the washings shaking / inverting / homogenising of volumetric solution

  • 2(b)(i)[1]

    rinse / run through / wash the burette with some of the KMnO4 solution OR run some of the KMnO4 solution from the burette to fill to the tip

  • 2(b)(ii)[1]

    add the KMnO4 dropwise (near the end point)

  • 2(c)(i)[1]

    the Fe2+(aq) / Fe3+(aq) mixture measured using a measuring cylinder AND leads to increased likelihood of non-concordant titres

  • 2(c)(ii)[1]

    (measure the volume) using a (volumetric / 25 cm3) pipette

  • 2(d)(i)[2]

    Set A rough titration 1 titration 2 titration 3 final volume / cm3 18.40 17.25 34.55 18.00 initial volume / cm3 0.65 0.15 17.25 0.95 titre / cm3 17.75 17.10 17.30 17.05 mean titre = 17.1 (cm3) Set B rough titration 1 titration 2 final volume / cm3 45.05 43.60 43.70 initial volume / cm3 0.20 0.15 0.10 titre / cm3 44.85 43.45 43.60 mean titre = 43.5 (cm3) M1: correct titres (to 2 decimal places) M2: correct means

  • 2(d)(ii)[2]

    M1: n MnO4– (aq) = 43.5 × 0.02 / 1000 = 8.70 × 10–4 n Fe2+ (aq) = 8.70 × 10–4 × 5 = 4.35 × 10–3 M2: mass of Fe 2+ (aq) = 4.35 × 10–3 × 55.8 × 100 25 = 0.971 g

  • 2(d)(iii)[1]

    n MnO4- (aq) = 17.1 × 0.02 / 1000 = 3.42 × 10–4 n Fe2+ (aq) = 3.42 × 10–4 × 5 = 1.71 × 10–3 mass of Fe 2+ (aq) = 1.71 × 10–3 × 55.8 × 250 25 = 0.954 g

  • 2(d)(iv)[1]

    % Fe3+ = ((2 (d) (ii) × 250 100) – 2 (d) (iii))/(2 (d) (ii) × 250 100)) × 100% OR (2 (d) (ii) × 2.5 – 2 (d) (iii)) / (2 (d) (ii) × 2.5) × 100%

  • 2(d)(v)[1]

    reduce / use (in step 6) more than 100 cm3 of solution (Fe2+ and Fe3+)

Make a free account to save your answers and see your weak topics and ask the AI why a wrong answer is wrong.